Ask the Experts Panel

The Knowledge and Know-how Connection

February 22, 2012

	Lifted Leads on QFP Components After placement and reflow, we are having a random lifted lead problem ...
	What Causes Solder Fillet Peaks We are soldering a screw with a single point solder robot that ...
	How Many Zones Needed for Lead-free Profile? How many zones are required to run a lead-free profile? Does the ...
	Soldering to Thin Flexible Circuits What is the best way to solder fine pitch surface mount connectors ...
	Conformal Coating & Connector Holes Is it possible to eliminate conformal coating from seeping into connector holes? ...
	Solder Bridging on BGAs What causes solder bridging on BGAs? Could it be moisture sensitivity, excessive ...
	Epoxy Bonding Problems on RoHS Boards We are having problems with epoxy bonding to RoHS boards. Is there ...
	Ultrasonic Cleaning Causing Damage What method can be used to prevent damage to sensitive SMT components ...
	Solder Deposits During Wave Soldering During wave soldering, is there a possibility for solder to deposit on ...
	Problems Hand Soldering 24 Layer Board We are assembling a back plane board with 24 layers. We are ...

More Ask the Experts »

Ask the Experts Panel »

At "Ask the Experts" we submit challenging questions to our panel of distinguished experts. You provide the questions and they provide the answers.

Ask the Experts Questions | Ask the Experts Panel
Submit A Questions | Join the Panel

Click the Member Name to see questions answered.

IPC — Association Connecting Electronics Industries
3000 Lakeside Drive, 309 S, Bannockburn, IL 60015
Phone: 978-478-5112 | Fax: 843-682-4255
Sandy Gentry, Editor | Kim Sterling, Publisher

About IPC Outlook | Contact Us | Privacy Policy | Terms of Use | Sponsorships