IPC OUTLOOK Logo
The Knowledge and Know-how Connection
IPC OUTLOOK Logo
June 19, 2013
Pin in Paste Plus Preforms to Eliminate Wave Soldering
Pin in Paste Plus Preforms to Eliminate Wave Soldering
Production Floor
Components Lifting During Wave Soldering
Components Lifting During Wave Soldering
Ask the Experts
What Causes Blow Holes?
What Causes Blow Holes?
Board Talk
Toe Fillet Requirements on Gull Wing Components
Toe Fillet Requirements on Gull Wing Components
Ask the Experts
How To Eliminate PCB Bow and Twist
How To Eliminate PCB Bow and Twist
Production Floor
Why is Solder Dross Sticking to Our PCBAs?
Why is Solder Dross Sticking to Our PCBAs?
Board Talk
Soldering Multilayer Ceramic Chip Capacitor
Soldering Multilayer Ceramic Chip Capacitor
Ask the Experts
Selective Soldering Technology Selection
Selective Soldering Technology Selection
Production Floor
EOS Exposure of Components in the Soldering Process
EOS Exposure of Components in the Soldering Process
Analysis Lab
Nitrogen Inerting For Lead-Free Wave Soldering
Nitrogen Inerting For Lead-Free Wave Soldering
Production Floor
More Related Programs  »
Featured Sponsor - please stay tuned ...   »
Lead-free Compatible Selective Soldering
Lead-free Compatible Selective Soldering
The FlexSolder W510 Selective Soldering System is a low cost, lead-free compatible, superior-quality system, offering high flexibility.
Juki Automation Systems

Syringe Dispensed Solder Paste for Hand Soldering
Syringe Dispensed Solder Paste for Hand Soldering
Would you advise using a syringe to dispense solder paste as an alternative to dispensing flux only? If use of solder paste dispensed from a syringe was acceptable, what expiration would you apply to these syringes?
At "Ask the Experts" we submit challenging questions to our panel of distinguished experts. You provide the questions and they provide the answers.

Ask the Experts Questions | Ask the Experts Panel
Submit A Questions | Join the Panel
Expert Panel contributors for this topic:
Peter Biocca, Senior Market Development Engineer, Kester
Doug Pauls, Principal Materials and Process Engineer, Rockwell Collins
Fritz Byle, Process Engineer, Astronautics
Edward Zamborsky, Regional Sales Manager, OK International Inc.
Doug Dixon, Global Marketing Director, Henkel Electronics
Comments  » Submit a Comment  »

No comments have been submitted.
Sponsors   »
IPC OUTLOOK Logo IPC — Association Connecting Electronics Industries
3000 Lakeside Drive, 309 S, Bannockburn, IL 60015
Phone: 978-478-5112 | Fax: 843-682-4255
Sandy Gentry, Editor | Neal Bender, Membership Director
About IPC Outlook  |  Contact Us  |  Privacy Policy  |  Terms of Use  |  Sponsorships
Programs: 900+  |  Directory Listings: 1450+  |  IPC Members: 3100+
Subscribers: 100,000+


Views: 1818