IPC OUTLOOK Logo
The Knowledge and Know-how Connection
Loading
IPC OUTLOOK Logo
February 9, 2012
Solderability Problems at Low Humidity
Board Talk
Solder Deposits During Wave Soldering
Ask the Experts
Design of New Solder Attach Technologies
Materials Tech
Problems Hand Soldering 24 Layer Board
Ask the Experts
Nitrogen Inerting For Lead-Free Wave Soldering
Production Floor
Problems With Wave Solder Lead Bridging
Board Talk
Wave Soldering Problems
Ask the Experts
Hand Soldering vs. Selective Wave
Ask the Experts
Problems with Blow Holes
Ask the Experts
BGA Processing for Reliability
Production Floor
More Related Programs  »



Epoxy Bonding Problems on RoHS Boards
We are having problems with epoxy bonding to RoHS boards. Is there ...
Ultrasonic Cleaning Causing Damage
What method can be used to prevent damage to sensitive SMT components ...
Solder Deposits During Wave Soldering
During wave soldering, is there a possibility for solder to deposit on ...
Problems Hand Soldering 24 Layer Board
We are assembling a back plane board with 24 layers. We are ...
Component Damage From IR Reflow
We have an SMT package with J formed leads that crack at ...
Organic Flux Residue Concerns
What concerns should we have with reliability if we skip cleaning after ...
Alternatives to Conformal Coating
What are conformal coating alternatives to insulate solder joints and exposed conductors ...
Does Lead-free Flux Make a Difference?
Does using a lead-free solder flux really make a difference? Why not ...
Cause of Unusual Contamination?
We have 40 PCB assemblies with unusual contamination. Do you have any ...
Wave Soldering Problems
We are seeing many process defects that occur after wave soldering operations. ...
More Ask the Experts  »
PCB Protection Overview
PCB Protection Overview
Henkel's circuit board protection include, conformal coating, encapsulants, potting, module sealing and low pressure molding.
Henkel Electronics

No-Clean Flux: How much is too much?
No-Clean Flux: How much is too much?
Hand soldering can sometimes leave excess no-clean flux residue on our boards. How much excess no-clean flux residue is too much?
This program first published September 2010
At "Ask the Experts" we submit challenging questions to our panel of distinguished experts. You provide the questions and they provide the answers.

Ask the Experts Questions | Ask the Experts Panel
Submit A Questions | Join the Panel
Expert Panel contributors for this topic:
Leo Lambert, Vice President, Technical Director, EPTAC Corporation
Jade Bridges, R&D Manager, Electrolube Ltd
Mike Jones, Vice President, Micro Care
Comments  »
Use the form below to submit a comment.

No comments have been submitted.
Submit A Comment  »
This comment is about the program:
No-Clean Flux: How much is too much?

The is a general comment.
Your Name
Company
E-mail
Country
Comments
Discussion of pricing, recommendations for specific products or advertisements are not appropriate. All comments are reviewed prior to posting. You must include your full name to have your comments posted. We will not post your email address, we request your email address so we can notify you if your comments are posted.
Today's Sponsor
Today's Sponsor
IPC Member Spotlight  »
The Design Process Just Got Easier
The Design Process Just Got Easier
Sunstone Circuits, has released the newest version of their design software, PCB123. Bottom line, the design process just got easier.
Sunstone Circuits image
Featured Sponsors  »
Rigid Flex That is Built to Last
Rigid Flex That is Built to Last
Once you have made the decision to package your electronics with rigid flex, it makes sense to pick a production partner who can build it right.
Printed Circuits, Inc.
APEX EXPO® Keynote William Shatner
APEX EXPO® Keynote William Shatner
Solve manufacturing challenges while networking with hundreds of exhibitors and thousands of peers focused on design, manufacture, assembly and test. Keynote by William Shatner.
IPC — Association Connecting Electronics Industries
Perfect Kit for Replating Gold Contacts
Perfect Kit for Replating Gold Contacts
There's simply no reason to scrap circuit boards when they have contacts contaminated with solder. Restore them using the Gold Contact Plating Kit.
CircuitMedic image
Rigid Flex That is Built to Last
Rigid Flex That is Built to Last
Once you have made the decision to package your electronics with rigid flex, it makes sense to pick a production partner who can build it right.
Printed Circuits, Inc.
High Speed Underfill & Coating in One System
High Speed Underfill & Coating in One System
The S-910 dispense platform enables high speed underfill of chip scale packages and precise coating onto moisture sensitive electronics.
Nordson ASYMTEK image
Internationally Recognized Training
Internationally Recognized Training
Train with the leading provider of IPC Certification, on-site or throughout US & Canada. Download the 2012 Schedule of all the IPC Programs...
EPTAC image
IPC OUTLOOK Logo IPC — Association Connecting Electronics Industries
3000 Lakeside Drive, 309 S, Bannockburn, IL 60015
Phone: 978-478-5112 | Fax: 843-682-4255
Sandy Gentry, Editor | Kim Sterling, Publisher
About IPC Outlook  |  Contact Us  |  Privacy Policy  |  Terms of Use  |  Sponsorships