IPC OUTLOOK Logo
The Knowledge and Know-how Connection
Loading
 IPC OUTLOOK Logo
February 9, 2012
Related Programs  »
pH Neutral vs. Alkaline Cleaning Agents
Analysis Lab
Ultrasonic Cleaning Causing Damage
Ask the Experts
Removing Flux from Low Standoff Heights
Production Floor
Organic Flux Residue Concerns
Ask the Experts
Is Baking Required After Water Cleaning?
Board Talk
How Clean is Clean?
Production Floor
Cleaning No-Clean Solder Paste
Ask the Experts
Collaborative Cleaning Process Innovations
Production Floor
Why Switch From Pure DI-Water to Chemistry
Production Floor
Effects of Ultrasonic Cleaning
Ask the Experts
More Related Programs  »


Ask the Experts  »
Epoxy Bonding Problems on RoHS Boards
We are having problems with epoxy bonding to RoHS boards. Is there ...
Ultrasonic Cleaning Causing Damage
What method can be used to prevent damage to sensitive SMT components ...
Solder Deposits During Wave Soldering
During wave soldering, is there a possibility for solder to deposit on ...
Problems Hand Soldering 24 Layer Board
We are assembling a back plane board with 24 layers. We are ...
Component Damage From IR Reflow
We have an SMT package with J formed leads that crack at ...
Organic Flux Residue Concerns
What concerns should we have with reliability if we skip cleaning after ...
Alternatives to Conformal Coating
What are conformal coating alternatives to insulate solder joints and exposed conductors ...
Does Lead-free Flux Make a Difference?
Does using a lead-free solder flux really make a difference? Why not ...
Cause of Unusual Contamination?
We have 40 PCB assemblies with unusual contamination. Do you have any ...
Wave Soldering Problems
We are seeing many process defects that occur after wave soldering operations. ...
More Ask the Experts  » 		New High-speed Modular Chip-shooter
New High-speed Modular Chip-shooter
The FX3 is a new high-speed modular chip-shooter delivering cutting edge technology combining speed, performance and high-uptime.
Juki Automation Systems

Ultrasonic Cleaning Considerations
Ultrasonic Cleaning Considerations
I need to clean using an ultrasonic cleaner. What considerations do we need to know about?
This program first published August 2010
At "Ask the Experts" we submit challenging questions to our panel of distinguished experts. You provide the questions and they provide the answers.

Ask the Experts Questions | Ask the Experts Panel
Submit A Questions | Join the Panel
Expert Panel contributors for this topic:
Terry Munson, President/Senior Technical Consultant, Foresite
Mike Jones, Vice President, Micro Care
Bill Schreiber, President, Smart Sonic Corporation
Jade Bridges, R&D Manager, Electrolube Ltd
Comments  »
Use the form below to submit a comment.
No comments have been submitted.
Submit A Comment  »
This comment is about the program:
Ultrasonic Cleaning Considerations

The is a general comment.
Your Name
Company
E-mail
Country
Comments
Discussion of pricing, recommendations for specific products or advertisements are not appropriate. All comments are reviewed prior to posting. You must include your full name to have your comments posted. We will not post your email address, we request your email address so we can notify you if your comments are posted.
Today's Sponsor
Today's Sponsor
IPC Member Spotlight  »
The Design Process Just Got Easier
The Design Process Just Got Easier
 Sunstone Circuits, has released the newest version of their design software, PCB123. Bottom line, the design process just got easier.
Sunstone Circuits image
Featured Sponsors  »
Rigid Flex That is Built to Last
Rigid Flex That is Built to Last
 Once you have made the decision to package your electronics with rigid flex, it makes sense to pick a production partner who can build it right.
Printed Circuits, Inc.
High Speed Underfill & Coating in One System
High Speed Underfill & Coating in One System
The S-910 dispense platform enables high speed underfill of chip scale packages and precise coating onto moisture sensitive electronics.
Nordson ASYMTEK image
Internationally Recognized Training
Internationally Recognized Training
 Train with the leading provider of IPC Certification, on-site or throughout US & Canada. Download the 2012 Schedule of all the IPC Programs...
EPTAC image
Printing Focused on Useful Technology
Printing Focused on Useful Technology
 EKRA focuses on "Useful Technology" that provides real benefits characterized by their efficiency, ease-of-use, and reliability.
EKRA America image
The Design Process Just Got Easier
The Design Process Just Got Easier
 Sunstone Circuits, has released the newest version of their design software, PCB123. Bottom line, the design process just got easier.
Sunstone Circuits image
Pick & Place Industry's Best Warranty
Pick & Place Industry's Best Warranty
 Does your equipment supplier stand behind the quality and reliability of their pick & place machines with a 5-year parts / 2-year labor warranty? Learn more...
Europlacer image
IPC OUTLOOK Logo IPC — Association Connecting Electronics Industries
3000 Lakeside Drive, 309 S, Bannockburn, IL 60015
Phone: 978-478-5112 | Fax: 843-682-4255
Sandy Gentry, Editor | Kim Sterling, Publisher
About IPC Outlook  |  Contact Us  |  Privacy Policy  |  Terms of Use  |  Sponsorships