Problems Hand Soldering 24 Layer Board

The Knowledge and Know-how Connection

February 9, 2012

	Solderability Problems at Low Humidity Board Talk
	Solder Deposits During Wave Soldering Ask the Experts
	Design of New Solder Attach Technologies Materials Tech
	Problems Hand Soldering 24 Layer Board Ask the Experts
	Nitrogen Inerting For Lead-Free Wave Soldering Production Floor
	Problems With Wave Solder Lead Bridging Board Talk
	Wave Soldering Problems Ask the Experts
	Hand Soldering vs. Selective Wave Ask the Experts
	Problems with Blow Holes Ask the Experts
	BGA Processing for Reliability Production Floor

More Related Programs »

Ask the Experts »

	Epoxy Bonding Problems on RoHS Boards We are having problems with epoxy bonding to RoHS boards. Is there ...
	Ultrasonic Cleaning Causing Damage What method can be used to prevent damage to sensitive SMT components ...
	Solder Deposits During Wave Soldering During wave soldering, is there a possibility for solder to deposit on ...
	Problems Hand Soldering 24 Layer Board We are assembling a back plane board with 24 layers. We are ...
	Component Damage From IR Reflow We have an SMT package with J formed leads that crack at ...
	Organic Flux Residue Concerns What concerns should we have with reliability if we skip cleaning after ...
	Alternatives to Conformal Coating What are conformal coating alternatives to insulate solder joints and exposed conductors ...
	Does Lead-free Flux Make a Difference? Does using a lead-free solder flux really make a difference? Why not ...
	Cause of Unusual Contamination? We have 40 PCB assemblies with unusual contamination. Do you have any ...
	Wave Soldering Problems We are seeing many process defects that occur after wave soldering operations. ...

More Ask the Experts »

Rigid Flex That is Built to Last

Once you have made the decision to package your electronics with rigid flex, it makes sense to pick a production partner who can build it right.
Printed Circuits, Inc.

Problems Hand Soldering 24 Layer Board

We are assembling a back plane board with 24 layers. We are finding that the solder does not flow through to the other side of the board.

Program: Ask the Experts
Channel: Soldering, Selective, Wave

This program first published August 2010

At "Ask the Experts" we submit challenging questions to our panel of distinguished experts. You provide the questions and they provide the answers.

Ask the Experts Questions | Ask the Experts Panel
Submit A Questions | Join the Panel

Expert Panel contributors for this topic:

	Alan Cable, President, ACE Production Technologies
	Karthik Vijay, Technical Manager, European Operations, Indium Corp.
	Bjorn Dahle, President, KIC
	Edward Zamborsky, Regional Sales Manager, OK International Inc.
	Gary Goldberg, President and CEO, PROMATION, Inc.
	Marc Peo, President, Heller Industries Inc.
	Mike Scimeca, President, FCT Assembly
	Kris Roberson, Manager of Assembly Technology, IPC
	Jack Crawford, Director - Certification & Assembly Technology, IPC
	David Bonito, Sales & Marketing Manager, Technical Manufacturing Corp.
	Leo Lambert, Vice President, Technical Director, EPTAC Corporation

Comments »
Use the form below to submit a comment.

No comments have been submitted.

Today's Sponsor

IPC Member Spotlight »

The Design Process Just Got Easier

Sunstone Circuits, has released the newest version of their design software, PCB123. Bottom line, the design process just got easier.
Sunstone Circuits

Featured Sponsors »

IPC — Association Connecting Electronics Industries
3000 Lakeside Drive, 309 S, Bannockburn, IL 60015
Phone: 978-478-5112 | Fax: 843-682-4255
Sandy Gentry, Editor | Kim Sterling, Publisher

About IPC Outlook | Contact Us | Privacy Policy | Terms of Use | Sponsorships