IPC OUTLOOK Logo
The Knowledge and Know-how Connection
Loading
 IPC OUTLOOK Logo
February 9, 2012
Related Programs  »
False Tin Whiskers: Masquerading Intermetallic
Analysis Lab
Cause of Unusual Contamination?
Ask the Experts
Addressing Head-In-Pillow Defects
Analysis Lab
What Causes Oxidation on SMT Pads?
Ask the Experts
The Effects of Flux Residues on Reliability
Analysis Lab
Head and Pillow SMT Failure Modes
Analysis Lab
Elimination of Whiskers from Electroplated Tin
Materials Tech
Fracture Prediction in Lead-Free Joints
Analysis Lab
Mysterious Solder Balls
Ask the Experts
Reducing Defects with Embedded Sensing
Materials Tech
More Related Programs  »


Analysis Lab  »
pH Neutral vs. Alkaline Cleaning Agents
Study compares material compatibility and cleaning effectiveness of pH-neutral and alkaline technologies ...
False Tin Whiskers: Masquerading Intermetallic
Paper covers misidentification of tin/copper intermetallic structures as tin whiskers and soldering ...
Reactions of Sn in the Cu-Sn-Zn Alloy
This paper reports a number of experimentally determined reactions that occur in ...
Embedded Components: Analysis of Reliability
Paper aims at analyzing and confirming the reliability performance of embedded components ...
Lead-free Reflow and Influence of Moisture
This paper examines concerns relating to lead-free reflow, PCB degradation, and the ...
Thermal Cycle Testing of PWBs
Paper establishes a test protocol for thermal cycle testing of bare PWBs ...
Void Detection in Solder Balls and Joints
Paper covers an automatic void detection algorithm. The method is applicable to ...
Addressing Head-In-Pillow Defects
The head-in-pillow defect has become a relatively common failure since the implementation ...
Thermal Shock/Drop Test of Lead-free
Paper has results from experimental research making a comparison of different lead-free ...
The Effects of Flux Residues on Reliability
Paper discusses an experiment designed to mimic partially activated flux residues under ...
More Analysis Lab  » 		Can You Believe Pick-and-Place under $60,000?
Can You Believe Pick-and-Place under $60,000?
Manncorp's MC-385 pick-and-place mounts 01005 chips, micro-BGAs and fine-pitch QFPs.
Manncorp

Hand Sanitizers and Risks to Electronics
Hand Sanitizers and Risks to Electronics
This paper examines typical hand sanitizers and hand lotions and their impact on high reliability electronic hardware.
Authored By:
Douglas Pauls, Michael Vosatka
Rockwell Collins
Cedar Rapids, IA USA
This program first published August 2010
Analysis Lab programs cover topics including:
Corrosion, Contamination, Data Acquisition, ESD and EOS, Inspection, Measurement, Profiling, Reliability, R&D, RFID, Solder Defects, Test, Tombstoning, X-ray and more.
Comments  »
Use the form below to submit a comment.
No comments have been submitted.
Submit A Comment  »
This comment is about the program:
Hand Sanitizers and Risks to Electronics
The is a general comment.
Your Name
Company
E-mail
Country
Comments
Discussion of pricing, recommendations for specific products or advertisements are not appropriate. All comments are reviewed prior to posting. You must include your full name to have your comments posted. We will not post your email address, we request your email address so we can notify you if your comments are posted.
Today's Sponsor
Today's Sponsor
IPC Member Spotlight  »
The Design Process Just Got Easier
The Design Process Just Got Easier
 Sunstone Circuits, has released the newest version of their design software, PCB123. Bottom line, the design process just got easier.
Sunstone Circuits image
Featured Sponsors  »
Pick & Place Industry's Best Warranty
Pick & Place Industry's Best Warranty
 Does your equipment supplier stand behind the quality and reliability of their pick & place machines with a 5-year parts / 2-year labor warranty? Learn more...
Europlacer image
The Turnkey Assembly Specialist
The Turnkey Assembly Specialist
 OEMs & contractors are reaping savings & benefits of in-house PCB assembly. Manncorp has expertise, support & wide range of equipment lines from $38,995 to $229,000 · TURNKEY INFO
Manncorp image
Surface Mount and BGA Pad Repair... Really?
Surface Mount and BGA Pad Repair... Really?
 Surface mount and BGA pad repair are routine operations at Circuit Technology Center. Learn how we can do it reliably.
Circuit Technology Center image
A Century of Global Soldering Leadership
A Century of Global Soldering Leadership
 Why spend so much time developing profiles for every board, when Vitronics Soltec's Autoset can do it for you, automatically?
Vitronics Soltec image
IPC Training & Certification from Blackfox
IPC Training & Certification from Blackfox
 Experience the Blackfox difference! Schedule your IPC Training and Certification with Blackfox at one of our many certification sites, or we'll come to you. Find the schedule...
Blackfox Training Institute image
New High-speed Modular Chip-shooter
New High-speed Modular Chip-shooter
 The FX3 is a new high-speed modular chip-shooter delivering cutting edge technology combining speed, performance and high-uptime.
Juki Automation Systems image
IPC OUTLOOK Logo IPC — Association Connecting Electronics Industries
3000 Lakeside Drive, 309 S, Bannockburn, IL 60015
Phone: 978-478-5112 | Fax: 843-682-4255
Sandy Gentry, Editor | Kim Sterling, Publisher
About IPC Outlook  |  Contact Us  |  Privacy Policy  |  Terms of Use  |  Sponsorships