IPC OUTLOOK Logo
The Knowledge and Know-how Connection
Loading
IPC OUTLOOK Logo
February 9, 2012
Solderability Problems at Low Humidity
Board Talk
Component Damage From IR Reflow
Ask the Experts
Lead-free Reflow and Influence of Moisture
Analysis Lab
Going Lead Free with Vapor Phase Soldering
Production Floor
LGA/QFN Packages Floating During Reflow
Analysis Lab
What Causes Chip Blow Off During Reflow?
Board Talk
How To Eliminate Pesky Solder Balls?
Board Talk
Weight Limit for Double Sided Reflow of QFNs
Production Floor
IR or Vapor Phase for Prototypes
Board Talk
SMT Component Shift
Ask the Experts
More Related Programs  »



Epoxy Bonding Problems on RoHS Boards
We are having problems with epoxy bonding to RoHS boards. Is there ...
Ultrasonic Cleaning Causing Damage
What method can be used to prevent damage to sensitive SMT components ...
Solder Deposits During Wave Soldering
During wave soldering, is there a possibility for solder to deposit on ...
Problems Hand Soldering 24 Layer Board
We are assembling a back plane board with 24 layers. We are ...
Component Damage From IR Reflow
We have an SMT package with J formed leads that crack at ...
Organic Flux Residue Concerns
What concerns should we have with reliability if we skip cleaning after ...
Alternatives to Conformal Coating
What are conformal coating alternatives to insulate solder joints and exposed conductors ...
Does Lead-free Flux Make a Difference?
Does using a lead-free solder flux really make a difference? Why not ...
Cause of Unusual Contamination?
We have 40 PCB assemblies with unusual contamination. Do you have any ...
Wave Soldering Problems
We are seeing many process defects that occur after wave soldering operations. ...
More Ask the Experts  »
Rigid Flex That is Built to Last
Rigid Flex That is Built to Last
Once you have made the decision to package your electronics with rigid flex, it makes sense to pick a production partner who can build it right.
Printed Circuits, Inc.

Concerns with High Humidity
Concerns with High Humidity
Will higher than normal humidity in our facility affect reflow soldering? What impact might it be?
This program first published May 2010
At "Ask the Experts" we submit challenging questions to our panel of distinguished experts. You provide the questions and they provide the answers.

Ask the Experts Questions | Ask the Experts Panel
Submit A Questions | Join the Panel
Expert Panel contributors for this topic:
Brian Smith, General Manager - Electronic Assembly Americas, DEK
Rodney Miller, Capital Equipment Operations Manager, SCS Coatings
Mike Scimeca, President, FCT Assembly
Comments  »
Use the form below to submit a comment.

No comments have been submitted.
Submit A Comment  »
This comment is about the program:
Concerns with High Humidity

The is a general comment.
Your Name
Company
E-mail
Country
Comments
Discussion of pricing, recommendations for specific products or advertisements are not appropriate. All comments are reviewed prior to posting. You must include your full name to have your comments posted. We will not post your email address, we request your email address so we can notify you if your comments are posted.
Today's Sponsor
Today's Sponsor
IPC Member Spotlight  »
The Design Process Just Got Easier
The Design Process Just Got Easier
Sunstone Circuits, has released the newest version of their design software, PCB123. Bottom line, the design process just got easier.
Sunstone Circuits image
Featured Sponsors  »
Innovative No-clean, Halide-free Tacky Flux
Innovative No-clean, Halide-free Tacky Flux
Multicore TFN700B is a no-clean, halide-free tacky flux formulated to address the challenging requirements of package-on-package applications.
Henkel Corporation image
APEX EXPO® Keynote William Shatner
APEX EXPO® Keynote William Shatner
Solve manufacturing challenges while networking with hundreds of exhibitors and thousands of peers focused on design, manufacture, assembly and test. Keynote by William Shatner.
IPC — Association Connecting Electronics Industries
Rigid Flex That is Built to Last
Rigid Flex That is Built to Last
Once you have made the decision to package your electronics with rigid flex, it makes sense to pick a production partner who can build it right.
Printed Circuits, Inc.
Internationally Recognized Training
Internationally Recognized Training
Train with the leading provider of IPC Certification, on-site or throughout US & Canada. Download the 2012 Schedule of all the IPC Programs...
EPTAC image
Printing Focused on Useful Technology
Printing Focused on Useful Technology
EKRA focuses on "Useful Technology" that provides real benefits characterized by their efficiency, ease-of-use, and reliability.
EKRA America image
Pick & Place Industry's Best Warranty
Pick & Place Industry's Best Warranty
Does your equipment supplier stand behind the quality and reliability of their pick & place machines with a 5-year parts / 2-year labor warranty? Learn more...
Europlacer image
IPC OUTLOOK Logo IPC — Association Connecting Electronics Industries
3000 Lakeside Drive, 309 S, Bannockburn, IL 60015
Phone: 978-478-5112 | Fax: 843-682-4255
Sandy Gentry, Editor | Kim Sterling, Publisher
About IPC Outlook  |  Contact Us  |  Privacy Policy  |  Terms of Use  |  Sponsorships