IPC OUTLOOK Logo
The Knowledge and Know-how Connection
Loading
 IPC OUTLOOK Logo
February 10, 2012
Related Programs  »
Solderability Problems at Low Humidity
Board Talk
Solder Deposits During Wave Soldering
Ask the Experts
Design of New Solder Attach Technologies
Materials Tech
Problems Hand Soldering 24 Layer Board
Ask the Experts
Nitrogen Inerting For Lead-Free Wave Soldering
Production Floor
Problems With Wave Solder Lead Bridging
Board Talk
Wave Soldering Problems
Ask the Experts
Hand Soldering vs. Selective Wave
Ask the Experts
Problems with Blow Holes
Ask the Experts
BGA Processing for Reliability
Production Floor
More Related Programs  »


Ask the Experts  »
Epoxy Bonding Problems on RoHS Boards
We are having problems with epoxy bonding to RoHS boards. Is there ...
Ultrasonic Cleaning Causing Damage
What method can be used to prevent damage to sensitive SMT components ...
Solder Deposits During Wave Soldering
During wave soldering, is there a possibility for solder to deposit on ...
Problems Hand Soldering 24 Layer Board
We are assembling a back plane board with 24 layers. We are ...
Component Damage From IR Reflow
We have an SMT package with J formed leads that crack at ...
Organic Flux Residue Concerns
What concerns should we have with reliability if we skip cleaning after ...
Alternatives to Conformal Coating
What are conformal coating alternatives to insulate solder joints and exposed conductors ...
Does Lead-free Flux Make a Difference?
Does using a lead-free solder flux really make a difference? Why not ...
Cause of Unusual Contamination?
We have 40 PCB assemblies with unusual contamination. Do you have any ...
Wave Soldering Problems
We are seeing many process defects that occur after wave soldering operations. ...
More Ask the Experts  » 		New High-speed Modular Chip-shooter
New High-speed Modular Chip-shooter
The FX3 is a new high-speed modular chip-shooter delivering cutting edge technology combining speed, performance and high-uptime.
Juki Automation Systems

Wave Solder Process Issue
Wave Solder Process Issue
We are seeing deformed, unwetted solder joints after moving past the wave solder air knife. What could be causing this?
This program first published September 2009
At "Ask the Experts" we submit challenging questions to our panel of distinguished experts. You provide the questions and they provide the answers.

Ask the Experts Questions | Ask the Experts Panel
Submit A Questions | Join the Panel
Expert Panel contributors for this topic:
EH Lim, Managing Director, Asia Pacific, ECD
Mark McMeen, VP Engineering Services, STI Electronics Inc.
Edward Zamborsky, Regional Sales Manager, OK International Inc.
Leo Lambert, Vice President, Technical Director, EPTAC Corporation
Comments  »
Use the form below to submit a comment.
No comments have been submitted.
Submit A Comment  »
This comment is about the program:
Wave Solder Process Issue
The is a general comment.
Your Name
Company
E-mail
Country
Comments
Discussion of pricing, recommendations for specific products or advertisements are not appropriate. All comments are reviewed prior to posting. You must include your full name to have your comments posted. We will not post your email address, we request your email address so we can notify you if your comments are posted.
Today's Sponsor
Today's Sponsor
IPC Member Spotlight  »
The Design Process Just Got Easier
The Design Process Just Got Easier
 Sunstone Circuits, has released the newest version of their design software, PCB123. Bottom line, the design process just got easier.
Sunstone Circuits
Featured Sponsors  »
A Century of Global Soldering Leadership
A Century of Global Soldering Leadership
 Why spend so much time developing profiles for every board, when Vitronics Soltec's Autoset can do it for you, automatically?
Vitronics Soltec
IPC Training & Certification from Blackfox
IPC Training & Certification from Blackfox
 Experience the Blackfox difference! Schedule your IPC Training and Certification with Blackfox at one of our many certification sites, or we'll come to you. Find the schedule...
Blackfox Training Institute image
New High-speed Modular Chip-shooter
New High-speed Modular Chip-shooter
 The FX3 is a new high-speed modular chip-shooter delivering cutting edge technology combining speed, performance and high-uptime.
Juki Automation Systems
Internationally Recognized Training
Internationally Recognized Training
 Train with the leading provider of IPC Certification, on-site or throughout US & Canada. Download the 2012 Schedule of all the IPC Programs...
EPTAC
High Speed Underfill & Coating in One System
High Speed Underfill & Coating in One System
The S-910 dispense platform enables high speed underfill of chip scale packages and precise coating onto moisture sensitive electronics.
Nordson ASYMTEK image
Pick & Place Industry's Best Warranty
Pick & Place Industry's Best Warranty
 Does your equipment supplier stand behind the quality and reliability of their pick & place machines with a 5-year parts / 2-year labor warranty? Learn more...
Europlacer image
IPC OUTLOOK Logo IPC — Association Connecting Electronics Industries
3000 Lakeside Drive, 309 S, Bannockburn, IL 60015
Phone: 978-478-5112 | Fax: 843-682-4255
Sandy Gentry, Editor | Kim Sterling, Publisher
About IPC Outlook  |  Contact Us  |  Privacy Policy  |  Terms of Use  |  Sponsorships