IPC OUTLOOK Logo
The Knowledge and Know-how Connection
Loading
 IPC OUTLOOK Logo
February 10, 2012
Related Programs  »
Cleaning Reballed BGA Components
Board Talk
Rework for Lead-Free Mirrored BGA Designs
Production Floor
Is Pre-Bake Required Prior to Rework?
Ask the Experts
BGA Replacement Limit
Ask the Experts
6 Common Mistakes of BGA Rework
Production Floor
Can You Rework Circuits Under a BGA
Ask the Experts
Reworked BGA Bridging at the Corners
Ask the Experts
Delamination Dilemma
Ask the Experts
BGA Re-balling from Lead-free to Tin-lead
Production Floor
Reworking Circuits Under a BGA Component
Ask the Experts
More Related Programs  »


Ask the Experts  »
Epoxy Bonding Problems on RoHS Boards
We are having problems with epoxy bonding to RoHS boards. Is there ...
Ultrasonic Cleaning Causing Damage
What method can be used to prevent damage to sensitive SMT components ...
Solder Deposits During Wave Soldering
During wave soldering, is there a possibility for solder to deposit on ...
Problems Hand Soldering 24 Layer Board
We are assembling a back plane board with 24 layers. We are ...
Component Damage From IR Reflow
We have an SMT package with J formed leads that crack at ...
Organic Flux Residue Concerns
What concerns should we have with reliability if we skip cleaning after ...
Alternatives to Conformal Coating
What are conformal coating alternatives to insulate solder joints and exposed conductors ...
Does Lead-free Flux Make a Difference?
Does using a lead-free solder flux really make a difference? Why not ...
Cause of Unusual Contamination?
We have 40 PCB assemblies with unusual contamination. Do you have any ...
Wave Soldering Problems
We are seeing many process defects that occur after wave soldering operations. ...
More Ask the Experts  »
Rigid Flex That is Built to Last
Rigid Flex That is Built to Last
Once you have made the decision to package your electronics with rigid flex, it makes sense to pick a production partner who can build it right.
Printed Circuits, Inc.

Recommended Rework Dwell Times
Recommended Rework Dwell Times
Can a dwell time that lasts too long cause open traces in leaded rework? What is the recommended dwell time in rework process?
This program first published August 2009
At "Ask the Experts" we submit challenging questions to our panel of distinguished experts. You provide the questions and they provide the answers.

Ask the Experts Questions | Ask the Experts Panel
Submit A Questions | Join the Panel
Expert Panel contributors for this topic:
Joe Karcewski, Product Manager, APS-Novastar, LLC
Neil O'Brien, Sales Director, Finetech
John Vivari, Application Engineering Supervisor, Nordson EFD
Comments  »
Use the form below to submit a comment.
No comments have been submitted.
Submit A Comment  »
This comment is about the program:
Recommended Rework Dwell Times
The is a general comment.
Your Name
Company
E-mail
Country
Comments
Discussion of pricing, recommendations for specific products or advertisements are not appropriate. All comments are reviewed prior to posting. You must include your full name to have your comments posted. We will not post your email address, we request your email address so we can notify you if your comments are posted.
Today's Sponsor
Today's Sponsor
IPC Member Spotlight  »
The Design Process Just Got Easier
The Design Process Just Got Easier
 Sunstone Circuits, has released the newest version of their design software, PCB123. Bottom line, the design process just got easier.
Sunstone Circuits
Featured Sponsors  »
Compact Reflow Oven with KIC
Compact Reflow Oven with KIC
 Space-saving 6 1/2 ft. long, 16" pin conveyor over 20" mesh belt. Computer-controlled, four convection heat zones, lead-free. Includes KIC "Auto Focus Power". $22,995 · CR-4000C INFO
Manncorp
MSD Damage Causes Early Field Failures
MSD Damage Causes Early Field Failures
 Components encapsulated in plastic or organic compounds are susceptible to moisture damage. So are PCBs, all can cause early field failures. Control MSDs per IPC J-Std-033b.1 and 1601.
Super Dry®
Printing Focused on Useful Technology
Printing Focused on Useful Technology
 EKRA focuses on "Useful Technology" that provides real benefits characterized by their efficiency, ease-of-use, and reliability.
EKRA America
The Component Rework Experts
The Component Rework Experts
 Rework of surface mount and through hole components can be a challenge. Our techs are ready to tackle your toughest rework projects.
Circuit Technology Center
The Design Process Just Got Easier
The Design Process Just Got Easier
 Sunstone Circuits, has released the newest version of their design software, PCB123. Bottom line, the design process just got easier.
Sunstone Circuits
APEX EXPO® Keynote William Shatner
APEX EXPO® Keynote William Shatner
 Solve manufacturing challenges while networking with hundreds of exhibitors and thousands of peers focused on design, manufacture, assembly and test. Keynote by William Shatner.
IPC — Association Connecting Electronics Industries
IPC OUTLOOK Logo IPC — Association Connecting Electronics Industries
3000 Lakeside Drive, 309 S, Bannockburn, IL 60015
Phone: 978-478-5112 | Fax: 843-682-4255
Sandy Gentry, Editor | Kim Sterling, Publisher
About IPC Outlook  |  Contact Us  |  Privacy Policy  |  Terms of Use  |  Sponsorships