IPC OUTLOOK Logo
The Knowledge and Know-how Connection
IPC OUTLOOK Logo
May 17, 2012
What are the Pros and Cons of Cleaning No-Clean?
Board Talk
Proper DI Water Resistivity for PCB Cleaning?
Ask the Experts
Webinar - Is Cleaning Critical to PoP Assemblies?
Analysis Lab
Ultrasonic Cleaning Considerations
Ask the Experts
Cleaning Conformal Coating After Rework
Ask the Experts
Cleaning Assemblies in Batch Systems
Production Floor
PCBA Cleaning with Sodium Bicarbonate
Board Talk
Do I Need to Clean My No-clean Assembly?
Production Floor
Selecting Cleaning Processes for Defluxing
Production Floor
Pros and Cons of Cleaning No-clean
Ask the Experts
More Related Programs  »



Mixed Technology - Which First
We are assembling a mixed technology board. We assemble the through hole ...
Insufficient Plated Hole Fill with Electrolytic Capacitors
We are having problems achieving the minimum hole of 75% on electrolytic ...
BGA Rework Flux Recommendation
Is there a flux we should evaluate when we replace BGA components? ...
What is Causing Oxidation?
After 2-3 months of service in the field we are noticing the ...
Rework or Repair?
We often need to strip solder splash contamination off gold edge contacts ...
Proper DI Water Resistivity for PCB Cleaning?
What the proper resistivity reading for DI water when cleaning electronic assemblies ...
Cold Solder Joints on 0603 Components
We encountered cold solder joints on 0603 components on a batch of ...
Dewetting of Acrylic Conformal Coating
We are using a no clean, alcohol based flux for wave. We ...
Ultrasonic Cleaning Considerations
I need to clean using an ultrasonic cleaner. What considerations do we ...
Cleaning Conformal Coating After Rework
We need to rework conformal coated circuit board assemblies. After the rework ...
More Ask the Experts  »
The Design Process Just Got Easier
The Design Process Just Got Easier
Sunstone Circuits, has released the newest version of their design software, PCB123. Bottom line, the design process just got easier.
Sunstone Circuits

Ultrasonic Cleaning Causing Damage
Ultrasonic Cleaning Causing Damage
What method can be used to prevent damage to sensitive SMT components during the ultrasonic cleaning process?
This program first published August 2009
At "Ask the Experts" we submit challenging questions to our panel of distinguished experts. You provide the questions and they provide the answers.

Ask the Experts Questions | Ask the Experts Panel
Submit A Questions | Join the Panel
Expert Panel contributors for this topic:
Bill Schreiber, President, Smart Sonic Corporation
Tom Forsythe, Vice President, Kyzen Corporation
Umut Tosun, Application Technology Manager, Zestron America
Steven Adamson, Market Specialist, Nordson ASYMTEK
Rodney Miller, Capital Equipment Operations Manager, Specialty Coating Systems
Terry Munson, President/Senior Technical Consultant, Foresite
Mike Konrad, President, Aqueous Technologies
Comments  »
Use the form below to submit a comment.

No comments have been submitted.
Submit A Comment  »
This comment is about the program:
Ultrasonic Cleaning Causing Damage

The is a general comment.
Your Name
Company
E-mail
Country
Comments
Discussion of pricing, recommendations for specific products or advertisements are not appropriate. All comments are reviewed prior to posting. You must include your full name to have your comments posted. We will not post your email address, we request your email address so we can notify you if your comments are posted.
Authentication
Please type the number displayed into the box. If you attempt to submit information and receive an error, you may need to refresh the page and insert the information again.
Today's Sponsor
Today's Sponsor
IPC Member Spotlight   »
Featured Sponsors   »
IPC OUTLOOK Logo IPC — Association Connecting Electronics Industries
3000 Lakeside Drive, 309 S, Bannockburn, IL 60015
Phone: 978-478-5112 | Fax: 843-682-4255
Sandy Gentry, Editor | Kim Sterling, Publisher
About IPC Outlook  |  Contact Us  |  Privacy Policy  |  Terms of Use  |  Sponsorships

Views: 2282